INDUSTRIAL TYPE ELASTOMERIC WATERPROOFING PAINT / COATING

Note: This is not your ordinary commercial based elastomeric paint.
Warranty is up to 5 years watertight wall. And can be top-coated by Davi's Paint, Boysen Paints, or any commercial based paints for desired color.

TS 10 - Industrial Type Elastomeric Waterproofing Paint is a high performance UV resistant water based coating formulated based on 100% Acrylic Emulsion for use as waterproofing paint on walls and roofs. It possesses outstanding exterior durability and excellent elasticity and elongation properties necessary to bridge forthcoming hairline cracks without cracking or wrinkling. Highly recommended for the waterproofing of roof deck, concrete gutters, toilet and bath, G.I. Roofing and Roof tiles and as protective coating for Polyurethane Foams.

RECOMMENDED SYSTEM OF APPLICATION

A. Concrete surfaces
1.    Apply one full coat of TS 212- Epoxy Deep Penetrating Sealant or TS 213 Concrete Acrylic Sealer as primer. Allow drying for at least 4 hours. Apply at package consistency.
2.    Apply 3 – 5 coats by brush or roller of TS 10 - Elastomeric Waterproofing paint until a dry film thickness of 8 – 10 mills is attained. Allow an undercoating interval of at least 2 – 4 hours. Fiber reinforcement is recommended for roof deck, concrete gutter, toilets and other areas where there’s possible immersion in water.
NOTE: All cracks greater than 2mm must be repaired.

B. Galvanized Iron Roofing
1.    Apply TS 214 Epoxy Zinc Chromate Primer (for new G.I.) or TS 211 Epoxy Red oxide Primer (for old G.I.). Allow drying overnight. May be reduced with Sealbond Epoxy Reducer if necessary.
2.    Apply three (3) coats of TS 10 Elastomeric Waterproofing Paint.  Allow an undercoating interval of at least 2 – 4 hours.

To be ordered, may or may not be ready for pickup right away. Minimum quantity per purchase is 5 sets. May require downpayment for new clients. Delivery charges may be applied.